MB95560H/570H/580H Series MB2146-510-01-E Setup Guide, Doc. # 002-05587 Rev. *A
17
EV board Introduction
3.2
Function List
The EV-board consists of a board and a sample firmware. The board provides a useful platform for
using the MCU and its peripherals. It is a useful development platform together with a BGMA and a
S
OFTUNE
. It features the following functions,
■
Clock and sub-clock
■
USB 5V power IF, external 5V power IF and the battery
■
Reset circuit and reset key
■
Provide IDC10 debug interface
■
LEDs for general use, LED1 indicates DBG pin work status
■
Provide one buzzer to demonstrate timer output
■
2 keys for general use
■
Potentiometer and temperature sensor
■
RS-232 level converter and DB9 interface (MAX232)
■
LIN circuit reserved
■
SIO 4 pins reserved
■
All MCU ports are easy accessible through test pins
■
Optional Starter kit to support each available MCU packages
