Cypress MB39C831-EVB-02, Руководство по эксплуатации

Страница: 10 / 28

PIN Descriptions
MB39C831-EVB-02 Thermal Energy Harvesting Evaluation Board Operation Guide, Doc. No. 002-08635 Rev. *A
10
3.2 Jumper, Switch Descriptions
Table 3-2. Jumper, Switch Descriptions
Jumper Description
Initial Setting
Constant Mode Charge Mode
JP2 Pull-up resistance setting for SW1-1 - SW1-5 Short Short
JP3 Loop setting for VDD pin and LX pin Short Short
JP4 To connect VOUT pin and C9 capacitor Open Short
JP5 To connect FB pin and MPPT_OUT pin Open Short
JP6 Pull-up resistance setting for S0 pin Short Short
JP7 Pull-up resistance setting for S1 pin Short Short
JP8 Pull-up resistance setting for S2 pin Short Short
JP9 To connect ENA pin and Pull-down resistance Open Open
JP10 To connect MPPT_ENA pin and Pull-down resistance Short Open
SW1-1 Pull-down /Pull-up setting for S0 pin Off (S0=L) Off (S0=L)
SW1-2 Pull-down /Pull-up setting for S1 pin Off (S1=L) Off (S1=L)
SW1-3 Pull-down /Pull-up setting for S2 pin Off (S2=L) Off (S2=L)
SW1-4 Pull-down /Pull-up setting for ENA pin On (ENA=H) On (ENA=H)
SW1-5 Pull-down /Pull-up setting for MPPT_ENA pin
Off
(MPPT_ENA=L)
On
(MPPT_ENA=H)
Table 3-3. Preset Output Voltage Settings of Constant Mode
MPPT_ENA S2 (SW001) S1 (SW002) S0 (SW003) Preset Output Voltage[V]
L L L L 3.0 (Initial Setting)
L L L H 3.3
L L H L 3.6
L L H H 4.1
L H L L 4.5
L H L H 5.0
Table 3-4. MPPT Settings of Charge Mode
MPPT_ENA S2 (SW001) S1 (SW002) S0 (SW003) MPPT Setting [%]
H L L L 50 (Initial Setting)
H L L H 55
H L H L 60
H L H H 65
H H L L 70
H H L H 75
H H H L 80
H H H H 85