MB2146-301A-E F
2
MC-8FX Family for MB95FV100D-101 MCU Board Operation Guide, Doc. # 002-07496 Rev. *A
3
Preface
Thank you for purchasing the MCU board for the F
2
MC-8FX family MB95FV100D-101 (model
number: MB2146-301A-E).
The MB2146-301A-E is a development support tool for developing and evaluating applied products
based on the F
2
MC-8FX family of microcontrollers manufactured by Cypress.
This manual is intended for engineers who use the MB2146-301A-E (referred to below as the MCU
board) to develop applied products based on Cypress F
2
MC-8FX family microcontrollers. The
manual describes how to handle the MCU board and its functions as well as the setting procedures.
Be sure to read this manual before using the MCU board.
■
Using the product safely
This manual contains important information required for using the MB2146-301A-E safely. Be sure to
read through the manual before using the product and follow the instructions contained therein to
use it correctly.
In particular, carefully read the “Caution of the products described in this document” at the beginning
of this manual to understand the requirements for safe use of the product before using it.
After reading the manual, keep it handy for future reference.
■
Warranty and liability disclaimers
The specifications of the product are subject to change without notice.
In no event shall Cypress be liable for any loss or damages whatsoever directly or indirectly arising
out of the use of the product.
■
Product operating environment
The operating temperature for the product ranges from 5°C to 35°C and the operating relative
humidity from 20% to 80%. Avoid using the product in hot or humid environment and prevent
condensation.
The product is a printed circuit board unit without a chassis such that all of the electronic
components are exposed. Therefore, neither put anything on the product nor touch or let an
electrically charged material contact a metal part of it. Once the product has been powered, try to
keep those objects away from it which can short-circuit it or easily catch fire and burn. Use the
product as horizontal as possible and avoid operating it at a place exposed to strong vibration, dust,
or explosive gas.
Note that using the product not in the above operating environment may unexpectedly cause
personal injury to the user (or another person if present near the product) or physical damage to
properties around the product.
