CYW943907AEVAL1F Evaluation Kit User Guide, Doc. No. 002-18703 Rev. *B
6
1.
Introduction
Thank you for your interest in the CYW943907AEVAL1F Evaluation Kit (EVK). The CYW943907AEVAL1F EVK enables
customers to evaluate and develop single-chip Wi-Fi applications using CYW43907 devices.
The CYW943907AEVAL1F EVK can be used either with WICED
®
Studio
™ IDE (version 5.0 or later), or ModusToolbox™
IDE (version 1.0 or later) to develop and debug your CYW43907 project. This document covers only the development flow
based on the ModusToolbox IDE. Refer to the equivalent kit user guide at
http://www.cypress.com/documentation/development-
kitsboards/cyw943907aeval1f-evaluation-kit
for the WICED Studio-based development flow. The CYW943907AEVAL1F EVK
offers footprint-compatibility with Arduino shields. In addition, the kit features an RJ-45 Ethernet connector, a micro-SD-card
slot, and onboard programmer/debugger and serial bridge chip. The CYW943907AEVAL1F EVK supports only 3.3 V as the
operating voltage.
Older revisions of this kit were named BCM943907AEVAL1F_2 and BCM943907AEVAL1F. CYW43907 and BCM43907 refer
to the same device.
The CYW943907AEVAL1F EVK is available through the
1.1 CYW943907AEVAL1F EVK Contents
The CYW943907AEVAL1F EVK includes the following:
▪
One CYW943907AEVAL1F Evaluation Board with assembled Arduino headers
▪
One USB 2.0 Type-A to Micro-B cable
