Cypress CPT-386, Руководство по эксплуатации, Страница: 5 / 8

2008.3.7 MPM-CPT386
2
3. Hardware Description
The following sections describe the hardware components.
3.1. Top Panel
1 Power switch and LED Indicator: When power is turned on the LED will
illuminate in green color. When press power switch once to turn the system
in standby mode and the LED will illuminate in red color.
Note: The factory setting is in power on mode.
3.2. Front Panel 3.3. Rear Panel
1 PC Input: Connect the PC input port to the output port of your computer
(desktop, notebook/laptop, or device providing PC resolution output),
using D-Sub 15-pin cable.
2 Power Supply: Plug the 3.3V DC 1A power supply into the unit and connect
the adaptor to AC wall outlet.
3 Component Output: Connect the component output port to the input port
of your display, using 3 RCA cable.
1 2
PC
INPUT
DC
3.3 V
3
Cr Cb Y
OUTPUT
1
POWER
PC to Component