Cypress CP-295NN, Руководство по эксплуатации, Страница: 8 / 12

4
6.2 Rear Panel
HDMI SERV. AUDIO OPTICAL
OUTPUT
MENU + -
3 1 2 4 5 6
1
SERV.: This port is reserved for firmware update only.
2
HDMI OUTPUT: This slot is to connect with HDMI TV/Monitor for
output image display.
3
OPTICAL OUTPUT: Connect to an amplifier or active speaker with
optical cable for PCM 2 channel audio output.
4
AUDIO OUTPUT: Connect to an amplifier or active speaker with
3.5mm phone jack for audio output.
5
MENU: Press this button to enter into the OSD menu and press it
again to enter into the selection.
6
+/- button: Press these buttons to
a. move up/down the OSD selection,
b. to adjust the value,
¾
Under normal operation (outside of OSD selection)
c. Press “+“ button to switch input between CV & SV,
d. Press “+“ together with “MENU” to switch output resolution to
XGA@60 (1024x768) instantly,
e. Press “-” together with “MENU” to switch output resolution to
720P@60 instantly
f. Press both “+” together with “-“ to set the device back to
factory reset setting.