(10). Installation
VCR, DVD, STB, DVHS
LCD display,
Projectors, Plasma
HDMI
output
Video,
SVideo
HDMI
Input
HDMI Cable
Digital Out: Connect to your TV through digital HDMI interface
6
(7). HDMI Pin Configuration
3
4
Output Setup
When Output Setup is selected a submenu as below appears:
Output Setup
Timing XGA
Exit
Press the " MENU/ENTER" button to enter into output timing select mode.
Press +,- to toggle through a variety of output resolutions as below.
Once your desired resolution is selected, press the menu/enter
to enter the resolution.
Note: All output resolutions except 576p have 60Hz vertical rate,
the 576p resolution has 50Hz vertical rate.
Use +,- button to move "V" to your desired parameter, then press MENU/ENTER
to enter into sub-menu of your selected parameter.
Picture Adjust
When Picture Adjust is selected a sub menu as below comes up.
Bright
Contrast
Color
Tint
Sharp
Default
Exit
USE +,- to move the tick (V) to your desired adjust item, press the Menu/Enter
to confirm your selection.
At this point, the selected parameter will turn red, and you can use +,- to increase
or decrease the value of the parameter.
When adjustment is complete, press "Menu" to leave the parameter. Move the tick "V"
to "Exit", then press menu/enter to exit.
(6). OSD Operation
After power on the unit , press the menu button to bring up the main menu
page as below:
Main Menu
Picture adj.
Output Setup
Exit
-RGB
-RGB
-RGB
-RGB
HDTV (RGB)
HDTV (RGB)
(5). Output Format
VGA
SVGA
XGA
WXGA
SXGA
480p
576p
720p
1080i
640x480
800x600
1024x768
1280x768
1280x1024
720x480
720x576
1280x720
960x540p
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
50Hz
60Hz
60Hz
Vertical rate
Resolution
Default Range
16
16
16
16
05
OK
1-31
1-31
1-31
1-31
1-19
-RGB
-RGB
-RGB
-RGB
-RGB
The format of HDMI output is digital RGB for all resolutions
PC (RGB)
960x540p
Pin#
1
3
5
7
9
11
13
15
17
19
Pin#
2
4
6
8
10
12
14
16
18
Function Assignment
TMDS Data2+
TMDS Data2-
TMDS Data1 Shield
TMDS Data0+
TMDS Data0-
TMDS Clock Shield
CEC
SCL
DDC/CEC Ground
Hot Plug Detect
Function Assignment
TMDS Data2 Shield
TMDS Data1+
TMDS Data1-
TMDS Data0 Shield
TMDS Clock+
TMDS Clock-
Reserved (N.C. on device)
SDA
+5V Power
1
2
19
18
(pseudo)
*
* The standard 1080i resolution is 1920 x1080i with sampling rate at 74 MHz.
CM-392's 1080i output is 960x540p which is half of the standard resolution,
therefore may be not be accepted by some of the HDTVs.
(pseudo)
*
