CR-22
1
3
2
1. DVI output: Connect the DVI output to the DVI input of your display using DVI cable.
2.DVI inputs: Connect your various DVI sources to each of the DVI input of the
unit using DVI cables.
3. Power: Plug the supplied 5VDC power supply into the unit.
4. RS232: 9-pin D-sub female connector for connecting to your other control
console for remote control.
Remote Control
1. Power:
Press the button to turn on/off the unit.
2. Direct input selector:
Press numerical number button to select your desired
input source.
3. Void buttons (No function). If the button number is
greater than the total input number of the unit then
the button is of no function.
Specifications
* Frequency bandwidth: 1.65Gbps(single link)
* Inputs: 4 x DVI female ports (Type A connector)
* Output: 1 x DVI female port (single link)
* 5VDC universal power supply
* Weight: 1kgs
* Dimension: 240(W) x104(D) x 44(H)mm
RS-232 Remote Control Protocol
The connection between splitter and remote controller with RS-232 modem cable.
ns definition of modem cable
RS-232 transmission format:
Baud Rate : 9600 bps
Data Bit : 8 Bits
Parity: None
Stop Bit: 1 bit
Splitter
Remote Controller
PIN
Definition
PIN
Definition
1
NC
1
NC
2
T xD
2
R xD
3
R x D
3
T x D
4
NC
4
NC
5
GND
5
GND
6
NC
6
NC
7
NC
7
NC
8
NC
8
NC
9
NC
9
NC