6.6.1 IR Signals flow
The names used in the RS232 commands identify the various blocks of
the system in which the matrix is the core.
a)
IR signal injected in the
ALL IR IN
“
From_Notice
”
of the matrix is
transmitted to all blasters connected to IR OUT jack of the receivers
HDBase T located in the Zone 1÷4. The path must be enabled
b)
IR signal generated by the IR receivers connected to the IR IN jack of
the receivers HDBaseT located in the Zone 1÷4, is repeated
by the
blaster connected to
ALL IR OUT
“
To_Notice
”
of the matrix. The path must
be enabled
c)
The single IR signal generated by the IR receiver connected to the
IR
IN1÷4
of the matrix
“
From_Source
”
, is repeated by the blaster connected
to IR OUT jack of the receivers HDBaseT located in the Zone A÷D
and
follows the connection of the matrix.
The path must be enabled
d)
The single IR signal generated by the IR receiver connected to the IR
IN jack of the receivers HDBaseT located in the Zone
A÷D, is repeated
by the blaster connected to
IR OUT (
HDMI IN 1÷4) of the matrix
“
To_Source
”
and follows the connection of the matrix.
The path must be
enabled
25
