Rear Panel
1.
DC Power supply 15 V input-
This is the power supply input port. It is to be
used with the power pack supplied.
2.
Video Input-
This is the video input port. Connect your input device to the video
input port using a composite RCA connector cable.
3.
Input signal detecting mode switch-
Auto represents automatic detecting mode.
M represents manual-detecting mode.
4.
Input system select switch-
When in M-mode, set the switch to match the actual
input signal type. (PAL, SECAM, NTSC 3.58, NTSC 4.43).
5.
Video output-
This is the video output port. Connect your output device to the
video output port using a composite RCA connector cable.
6.
Output system select switch-
Set the switch to the type of signal you wish to
output. You may select either PAL or NTSC.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NSW, 2304 Australia,
Phone +61 249689313 Fax +61 249689314
www.converters.tv