Cypress CDL-165HUB, Руководство по эксплуатации

Страница: 7 / 20

7. Operation Controls and Functions
The following sections describe the hardware components of the unit and
include a step by step installation guide and other suggested settings.
7.1 Front Panel
HDMI OUT AUDIO OUT VGA OUT
1 2 3
①
HDMI OUT: Connect the HDMI output to the HDMI display.
②
AUDIO OUT: Connect the audio output to the speaker or AVR.
③
VGA OUT: Connect the VGA output to the VGA monitor.
Note: HDMI and VGA can output at the same time.
7.2 Back Panel
USB PORT USB IN
DC 5V
EDID
VGA
OFF HDMI
1 2 5 4 3
①
Power: This slot is where the user plugs in the 5V DC power supply of this
unit before connecting the adaptor to an AC wall outlet.
②
Link LED: When the LED is on it meems the system is ready and there is
audio and Video can be sent.
③
EDID control switch: The default setting for this switch is HDMI, leave the
switch here as long as the connected display is compatible. When
the EDID control is switched from HDMI to VGA the unit will detect the
sources EDID and record it. Turn off in order to use the built in EDID.
④
USB Port: These ports allow the receiver to act like a USB hub, allowing you
to connect an External Hard Drive, Keyboard or Mouse.
3