7.3 Rear Panel
DC 5V
HDMI OUT
EDID
OFF ON
POWER
LINK
①
②
③
④ ⑤
①
Power: This slot is where you plug in the 5V DC power supply of the unit
before connecting the adaptor to an AC outlet.
②
HDMI OUT: The display output port of the converter that is only compatible
with an HDMI display.
③
EDID control switch: The default setting of this switch is on.
Leave as is if the display is working properly. If the display has a built-in
EDID, the screen will show the display’s resolution, and users can choose
the desired screen resolution(available in extended mode). When
switched off, the screen will show internal EDID, and users can select the
screen resolution from the provided resolutions.
NOTE:
When switching from on to off, users need to go to “Launch USB Server
” to disconnect DisplayLink USB to HDMI and reconnect it again. If not,
the system will remain on. However, from off to on, the user does not
need to reconnect the DisplayLink USB to HDMI device,
the system will automatically switch to on mode.(See section 9 for details)
④
LINK LED Indicator: When input switches to MINI USB mode the blue LED
will turn on when the source is connected. When input is switched to
Ethernet a blinking blue LED means its trying to connect.
⑤
Power LED Indicator: Red LED will switch on when the power is connected
to the converter.
5