CY3280-BMM Universal CapSense™ Matrix
Button Module Kit Quick Start
Doc. # 001-51788 Rev. *A
Cypress Semiconductor
198 Champion Court
San Jose, CA 95134-1709
Phone (USA): 800.858.1810
Phone (Intnl): 408.943.2600
http://www.cypress.com
©2009 Cypress Semiconductor Corporation. CapSense™ and Programmable System-on-Chip™ are
trademarks, and PSoC
®
is a registered trademark of Cypress Semiconductor Corp. All other trademarks or
registered trademarks referenced herein are property of the respective corporations.
Cypress Semiconductor Corporation
198 Champion Ct., San Jose, CA 95134 USA
If you have questions, call
Cypress Customer Support
+1 (800) 541-4736 Ext. 8 (in the USA),
+1 (408) 943-2600 Ext. 8 (International),
or visit
Doc. # 001-51788 Rev. *A
■
Click
Toggle Device Power
button. The Power LEDs D1, D2 on the CY3280-
20x34 UCC board lights up. Corresponding LEDs on other UCC board's lights up.
5. Test the Board
■
Touch one button at a time with your finger. Each button touch lights up
corresponding row and column LED, indicating the button you are touching. If you
touch more than one button, all the LEDs are turned OFF as multi touch is not
supported.
■
To monitor the CapSense parameters refer to readme file on CD/DVD at:
\Firmware\20x34_CSA\PSoC Designer\PD project1\Readme.pdf
6. Design Support and Resources
A wealth of information about PSoC
Designer, and CapSense™ Best Practices is
www.cypress.com
web site, and more is frequently added. For
knowledge base articles, customer forums, and online application support, visit
