© 2017 Cypress Solutions
Manual: CTM ONE (Revision 1.0)
5
Notice
1
Notice
Due to the nature of wireless communication, the reception or transmission of data can never be guaranteed.
Data may be delayed, corrupted or never received. Data transfer problems are rare with well-constructed and
configured wireless networks used in conjunction with devices such as the CTM ONE wireless data device.
Cypress Solutions Inc. accepts no responsibility for damages of any kind including, but not limited to personal
injury, death, or loss of property due to the delay or loss of data resulting from the use of the CTM ONE wireless
data device.
1.1
Operation in hazardous/restricted environments
Wireless transmitters can cause interference with some critical operation equipment. For this reason it is
required that the RF portion of the CTM ONE wireless data device be turned off when in the vicinity of blasting
operations, medical equipment, life support equipment, or any other equipment that is susceptible to radio
interference. The CTM ONE wireless data device must be turned off when on-board or in the vicinity of any
aircraft. The FAA prohibits the use of wireless transmitter equipment at any time during aircraft flight.
1.2
Regulatory restrictions
CAUTION: Any modifications to the CTM ONE wireless data device not expressly authorized by Cypress Solutions
Inc. may cause its regulatory approval status to become invalidated, thereby voiding your authority to use the
product.
The CTM ONE wireless data device contains a wireless module approved under FCC CFR 47 part 2.1091 and
Industry Canada RSS-102 rules for operation as a mobile or fixed device with its specified antenna of gain ≤6dBi
and from which a separation distance of at least 20 cm (8”) must be maintained from all persons at all times and
during all modes of operation. If external antennas are used the antennas used must not be co-located or
operated in conjunction with any other antenna or transmitter. These rules are in place to prevent any possible
hazard due to personal exposure to electromagnetic radiation.
CTM ONE devices are designed to operate with the approved wireless module installed. The module has its own
FCC and Industry Canada approval ID number.
1.3
Electromagnetic Interference (EMI) – United States FCC Information
This equipment has been tested and found to comply with limits for a class A digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
commercial installation. This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communication.
However, there is no guarantee that harmful interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
