39
Copyright (C) 2011-2012 Reserved by Cypress Semiconductor Corporation
GX3 EEPROM Programming User Guide
Figure 16.
Windows Production Test Tool Setting Tab – Loopback Setting
Field Name
Description
Log File
Select a log file
Ethernet
Setting
Server IP
Enter the IP address of Server PC
Port
Enter the port number of TCP or UDP packets
Packet Type
Select a TCP or UDP packet type
Packet Number
Enter the packet number for Production Test
Stop When No Rsp. or Error
Exceed
Enter the allowed no response or error packet count
Ping Test Packet Length
Enter the data length (1 ~ 65500 bytes) of ping command
Ping Test Packet Number
Enter the packet number for ping test
“Ethernet Test Item Select”
button
Select Production Test items.
Loopback
Setting
Destination IP
Enter a different IP address from the IP address of GX3
Windows test driver but at the same subnet.
Packet Number
Enter the packet number for Production Test
“Loopback Test Item Select”
button
Select Production Test items.
Note that the loopback test items only support 100M/10M Full-
duplex modes. Please connect a loopback RJ-45 connector to
GX3 for loopback test.
“Load Setting” button
Load the default setting of “EEPROM” and “Setting” tabs from