Cypress Semiconductor FM4-216-ETHERNET, Руководство пользователя, Страница: 7 / 75

SHOW TITLE MM/DD/YY 7
Test it

The microcontroller on the FM4-216-ETHERNET
is already preprogrammed with an example application (<drive:>\Examples\fm4-216-ethernet-tp_v12.srec).

Verify that jumpers JP75 and JP77 are set to 1-2 position and jumper JP76 is set to 3-4 position

Connect the FM4-216-ETHERNET via DEBUG USB port (X2) with the PC

Verify that switch S1 is set to RUN

Press the Reset -button

The FM4-216-
ETHERNET‘s display will show a greeting message

Using the Up and Down pushbuttons will scroll through a menu on the LCD module

Connect X3 (static IP address 192.168.1.20) to a PC or local area network

Configure your PC to an untaken IP address within the same subnet (such as 192.168.1.42)

Point your webbrowser to board‘s IP address (192.168.1.20)

Install the USB Driver first <drive :> \drivers\driverinstaller.exe

Check the availibility for virtual COM port e.g. with Windows Device Manager

Open a serial terminal tool

e.g. Cypress Serial Port Viewer
<drive:>
\tools\serialportviewer\setup.exe

Settings 115200 baud, 8N1

More board tests are available via serial console