Cypress Semiconductor EZ-USB GX3 CY4701, Справочное руководство по конструкции, Страница: 11 / 23

Kit Operation
CY4701 EZ-
USB® GX3™ Reference Design Guide Doc. No. 001-97892 Rev. **
11
6. Set the IP address as shown in Figure 3-6 and click OK.
Figure 3-6. Setting the IP Address Manually
7. Repeat steps 4 to 6 on the client PC to configure the IP address. Note that the IP address for the client PC should be
different from that of the server PC, but the domain and subnet mask need to be the same. For example, if the IP
address of the server PC is set as 192.168.0.1, then the IP address of the client PC should be 192.168.0.
xxx , where
xxx can be any number between 2 and 254.
8. Open the command prompt on the server PC and browse to the path where iperf.exe is stored.
9. Run the command iperf.exe
–s
, as shown in Figure 3-7 .
Figure 3-7. Running Iperf on Server PC