Cypress Semiconductor CY8CKIT-062-WiFi-BT, Руководство пользователя, Страница: 43 / 86

PSoC 6 WiFi-BT Pioneer Kit Guide, Doc. # 002-22677 Rev. *B 43
Kit Hardware
31.Cypress PSoC 6 MCU (CY8C6247BZI-D54, U1): This kit is designed to highlight the features of
the PSoC 6 MCU. For details on PSoC 6 MCU pin mapping, see Table 4-2 on page 45 .
32.PSoC 6 USB Type-A connector (J27): USB devices can be connected to this USB Type-A
connector and communicate with PSoC 6 MCU USB host applications.
33.Arduino-compatible ICSP header (J5): This header provides an SPI interface for Arduino
ICSP-compatible shields.
34.PSoC 6 MCU current measurement jumper (J8, on the bottom side of the board): An
ammeter can be connected to this jumper to measure the current consumed by the
PSoC 6 MCU.
35.KitProg2 (PSoC 5LP) programmer and debugger (CY8C5868LTI-LP039, U2): The PSoC 5LP
device (CY8C5868LTI-LP039) serving as KitProg2, is a multi-functional system, which includes
a programmer, debugger, USB-I2C bridge, USB-UART bridge, and a USB-SPI bridge. KitProg2
also supports custom applications. For more details, see the
KitProg2 User Guide .
36.Battery connector (J15, on the bottom side of the board): This connector can be used to
connect a lithium-ion polymer battery. Note that a battery is not included in the kit package and
should be purchased separately if you want to demonstrate battery charging.
37.USB PD output (J16): This header provides a voltage output when the USB Type-C power
delivery system receives power from an external host connected to J10 . See “EZ-PD CCG3
Type-C Power Delivery” on page 56 for more details.
See “Hardware Functional Description” on page 58 for details on various hardware blocks.
Table 4-1 shows the functionalities of the on-board selection switches.
Figure 4-5 shows the pinout of the Pioneer board.
Table 4-1. Selection Switches on the Pioneer Board
Switch
Location on the
Board
Purpose
Default
Position
SW5 Front
Selects the V
DD
supply of the PSoC 6 MCU between 1.8 V,
3.3 V, and the variable 1.8 V to 3.3 V, which is controlled
by KitProg2. 3.3 V
SW7 Back
Selects the VBACKUP supply connection of the PSoC 6
MCU between V
DDD
and the super-capacitor. When V
DDD
is selected, the regulator can be turned ON/OFF by
KitProg2. When the super-capacitor is selected, the
PSoC 6 MCU can turn the regulator ON/OFF.
V
DDD
/KitProg2