Cypress Semiconductor CY8CKIT-062-WiFi-BT, Руководство пользователя, Страница: 35 / 86

PSoC 6 WiFi-BT Pioneer Kit Guide, Doc. # 002-22677 Rev. *B 35
WICED
5. In the Make Target window, right-click and select New , and give it the following Target Name:
demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062 download_apps download run
(see Figure 3-12 ).
Figure 3-12. Creating New Make Target
The Make Target window will show the following added target:
demo.CE222494_PSoC6_WICED_WiFi-CY8CKIT_062 download_apps download run
(see Figure 3-13 ).
Note: Before executing the next step, ensure that you connect the CY8CKIT-062-WiFi-BT kit to
the same PC through the Type-C USB cable connected to the J10 port. See 4.3.3 Kit
Enumeration and Programming Modes of KitProg2 to ensure that the kit is successfully
enumerated and Port Selection is set to CMSIS-DAP mode.
6. Double-click the newly created make target to build the code, program the kit, and run the
example. Note that this may take a few minutes.
The Console window will display a message "Build Finished" as shown in
Figure 3-13 .