CYPRES S6AL211A94, Руководство пользователя

Страница: 11 / 17

About Corresponded UART Interface
S6AL211A94, ASSP 4ch LED Driver IC for Intelligent Lighting Hardware Manual, Doc. No. 002-08545 Rev. *B 11
2.2.3 Memory Map
Table 3. Memory Map
Address Bit Parameter Name R/W
Initial
Value
Feature Description
0x00 [7:0] POWER ON LEVEL1 R/W 00h Power-on Dimming level of ch.1
0x01 [7:0] POWER ON LEVEL2 R/W 00h Power-on Dimming level of ch.2
0x02 [7:0] POWER ON LEVEL3 R/W 00h Power-on Dimming level of ch.3
0x03 [7:0] POWER ON LEVEL4 R/W 00h Power-on Dimming level of ch.4
0x04 [7:0] FADE TIME R/W 00h
Fade time
00h : no fade
01h :0.5 s
02h :1 s
03h : 2 s
Others: invalid
0x05
[7:4] reserved
R/W
0000 -
[3] DIMMING CURVE4 1
Dimming curve of each channel
0 : Log curve
1 : Linear curve
[2] DIMMING CURVE3 1
[1] DIMMING CURVE2 1
[0] DIMMING CURVE1 1
0x06
[7:4] reserved
R/W
0000 -
[3] DIMMING ENABLE4 1
Dimming of each channel
0 : Disable
1 : Enable
Note : Please set to "0" to not use channel.
[2] DIMMING ENABLE3 1
[1] DIMMING ENABLE2 1
[0] DIMMING ENABLE1 1
0x10
[7:1] reserved
R/W
0000000 -
[0]
MOTION SENSOR
SWITCH
1
Dimming by the trigger input
0 : Disable
1 : Enable
Note : This setting is not written to non-volatile
memory.
0x11
[7:4] reserved
R/W
0000 -
[3]
MOTION SENSOR
CHECK TIME
0
Time to move to the standby state
0 : 10 s
1 : 5 min
[2]
ILLUMINANCE
SENSOR ENABLE
0
Illumination sensor input
0 : no input
1 : input
[1:0]
MOTION SENSOR
MODE
00
Select the trigger input
2'b00 : trigger input disable
2'b01 : trigger input by motion sensor
(SENSE4-pin input)
2'b1* : trigger input by UART
communication
[1]
(motion sensor input disable)
0x12 [7:0]
ILLUMINANCE
SENSOR LOWER DATA
R -
Illumination sensor Lower 8 bit data
[0-5V input, 10 bit A/D convert]
0x13
[7:2] reserved
R
000000 -
[1:0]
ILLUMINANCE
SENSOR UPPER DATA
-
Illumination sensor upper 2 bit data
[0-5 V input, 10 bit A/D convert]
0x20 [7:0] ACTUAL LEVEL1 R - Current dimming level of ch.1
0x21 [7:0] ACTUAL LEVEL2 R - Current dimming level of ch.2
0x22 [7:0] ACTUAL LEVEL3 R - Current dimming level of ch.3
0x23 [7:0] ACTUAL LEVEL4 R - Current dimming level of ch.4