CYP SDV-FTRX, Руководство по эксплуатации, Страница: 9 / 24

9
6.2 Rear Panel
SFP+ DP IN HDMI IN HDMI OUT USB IR IN IR OUT AUDIO LAN RS-232
TX RX
DC 12V
11 10 9 8 7 6 5 4 3 2 1
1 HDMI OUT PORT:
Connect to an HDMI TV, monitor or amplifier for
digital video and audio output.
2 HDMI IN PORT:
Connect to HDMI source equipment such as a media
player, game console or set-top box.
3 DP IN PORT:
Connect to DisplayPort source equipment such as a PC,
laptop or set-top box.
4 SFP+ PORT:
Insert a standard SFP+ module, and connect the
appropriate optical cable to allow data transmission between
compatible Transmitter/Receiver units or to a 10-gigabit optical fiber
network switch.
Note: Single-mode and multi-mode support is dependent on the SFP+
modules used. Simplex SFP+ modules must use different wavelengths for
each end (e.g. 1330/1270nm).
5 LAN PORT:
Connect to an Ethernet supporting device or to your
local network as appropriate to extend the network between the
Transmitter and Receiver.
6 AUDIO PORT:
A Transmitter Mode:
Connect to the stereo analogue output of
a device such as a CD player or PC. The audio signal is passed
directly to the audio port on the connected Receiver.
B
Receiver Mode: Connect to powered speakers or an amplifier for
stereo analogue audio output. The audio signal comes directly
from the audio port on the connected Transmitter.
7 IR OUT PORT:
Connect to an IR Blaster to transmit IR signals to devices
within direct line-of-sight of the IR Blaster.
8 IR IN PORT:
Connect to an IR Extender to extend the IR control range