CYP QU-8MS, Руководство по эксплуатации

Страница: 8 / 44

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
2 3 1 4 1
1 HDMI OUT 7/8/1:
Using HDMI cables connect these slots to displays
in order to show HDMI/3D content.
Note: When the input signal contains 3D data the display must support
3D content in order to display an image.
-
A. This system was tested with 24AWG cables if using cables of
another type, the performance of this system may be different.
-
B. Cable distance tested with a PS3 & 40” Samsung UA40B700 12 bits
LED TV.
-
C. Figures provided in this manual are for reference only, actual
figures may depend on the source and display used along with the
cables specifications.
2
SYNC RED 3D ORG: This LED will turn red when the input signal is not
in 3D. If the input signal is 3D then the LED will change to orange.
3
HDMI IN: This slot connects with source devices such as DVD/Blu-Ray
players in order to receive an HDMI signal.
4
POWER LED & DC 5V: This slot is where you plug the 5V DC power
supply into the unit and connect the adaptor to an AC outlet. The LED
will switch on when power is ON.