CYP QU-8-4K22, Руководство по эксплуатации

Страница: 8 / 16

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1 2 3 4 5
OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
EDID
STD TV
SYS-RST
ON OFF
1 3 2
1
EDID:
Switch the dip switch to choose EDID mode to Standard (STD)
or TV mode. When on TV mode, the unit will automatically detect and
store output 1 sink EDID data. Switch to STD mode, the unit will set to
standard at 1080p and audio standard at PCM 2 channel.
2
OUTPUT 1~5: Connect to 6G HDMI TV / display or HD amplifier for
output display.
3 SYS-RST:
Switch the dip switch from off to on, the unit will trigger TV
to its HDMI input1 immediately, when stays in on, the unit will trigger
the system in every 8~10 minutes. (*The purpose of this function is
to guarantee all outputs are displaying the corresponding image. For
example, at the display side user may switch to different HDMI input
or select other sources and this reset function will force the display to
switch back to its HDMI input1. TV/displays shall support CEC function
in order to perform this function successfully.)