CYP QU-4M, Руководство по эксплуатации

Страница: 5 / 8

Page 3
3.2 Rear Panel
1. EDID Control Switch: Default setting is TV (downstream). In this mode the QU-
4M will search all output ports (starting at output 1) for the highest video/
audio settings connected to each of the outputs. The detection priority of
the matrix is v1.3 HDMI, v1.2 HDMI, DVI. Switch to STD (fixed EDID) if you
have any issues with the default setting (TV). When switching to STD, please
ensure that the unit is powered OFF, then ON again, for the setting to be
made. By changing to STD, this will force the source to be configured as
standard stereo (PCM) Audio and initiate a search for a common compatible
video resolution.
Note: When in STD mode the deep color is suggest to switch to 8-bit for longer distant display.
2CH/Multi CH – Supports 2 channels or Multi audio channels audio function. This selection is only
available when EDID is in STD mode.
Note: When Multi CH is selected TV/display must also supports Multi CH function otherwise, TV/
display will have no audio output. Unless, HDMI output connect to Amp and then to TV/display.
8/12 bit – Supports 8 or 12 bit’s deep color function. This selection is only available when EDID is in
STD mode.
Note: When HDMI output has both 8-bit and 12-bit displays, to ensure all output will display, switch to
8-bit.
On the other hand, when all output are with the same bit’s displayer of 12-bit or 8-bit then switch the
function to 12-bit or 8-bit will be proper. The splitter will not function according to different bits’ of
display on HDMI outputs simultaneously
2. System reset function: It is suggested that this function is switched OFF,
except when doing system reset. By switching this ON the system will
reset TV to HDMI Input within 8~10 minutes. Switching to OFF means CEC
bypass.
Note: The system reset function will only operate when the display has built-in CEC functionality.
1
HDMI
OUTPUT
HDMI
OUTPUT
HDMI
OUTPUT
3 2 4