10
active. A green LED indicates that AVLC is in HQ (High Quality) mode.
A red LED indicates that AVLC is in STD (Standard) mode.
POWER LED:
This LED will illuminate to indicate the unit is on and
receiving power.
LINK LED:
This LED will illuminate solidly when a live connection
with a compatible Receiver is active. The LED will blink with a regular
pattern if a Receiver is connected but there is not currently a live
signal. The LED will blink with an irregular pattern if a connection error
has occurred.
6.4 Receiver's Rear Panel
IR1
EXTENDER
CAT5e/6/7
IN
HDMI OUT
IR2
BLASTER
1
2
3
4
1
IR2 BLASTER:
Connect to the provided IR Blaster to transmit IR signals
to devices within direct line-of-sight of the IR Blaster.
2
IR1 EXTENDER:
Connect to the provided IR Extender to extend the
IR control range of remotely located devices. Ensure that the remote
being used is within direct line-of-sight of the IR Extender.
3
CAT5e/6/7:
Connect to a compatible HDBaseT Transmitter with a
single Cat.5e/6/7 cable for transmission of all data signals.
4
HDMI OUT:
Connect to an HDMI TV, monitor or amplifier for digital
video and audio output.
