manualshive.com logo in svg

CYP PUV-1630TTX, Руководство по эксплуатации, Страница: 15 / 44

Поделиться
Скачать
CYP PUV-1630TTX Скачать руководство пользователя страница 15

15

6.3.2 Automation Tab

The Automation tab provides control over the unit’s automatic control 

command broadcast behavior when the specified system Automation 

Events occur. Automation commands may be sent to 3rd party devices via 

standard CEC, or customizable RS-232.

Note: Sending RS-232 commands requires the use of a compatible HDBaseT 

Receiver with an RS-232 port.

1) Event: 

Use the dropdown to select the Automation Event to configure. 

Available Automation Events are:

–  Power On: 

This unit is powered on.

–  Out A Source Active: 

The currently selected input changes 

from inactive to active.

–  Out A Source Lost: 

The currently selected input changes from 

active to inactive.

■

 CEC: 

Enable or disable sending a CEC command when the 

currently selected Automation Event is activated.

 

Note: CEC support must be enabled on the connected HDMI device.

■

 Delay: 

Set the length of time, in seconds, that the specified 

Automation Event must continue to be true before sending the 

defined CEC command.

Содержание PUV-1630TTX













































Отзывы:

Нет отзывов