CYP PU-USB-AL, Руководство по эксплуатации, Страница: 6 / 16

6
1. INTRODUCTION
Currently, USB is the most prevalent interface standard in use today, and
almost every webcam, storage device, and HID (Human Interface Device)
uses it. Applications for USB are everywhere, so naturally the need to
extend the range of a USB connection is just as common. This USB 2.0 Hub
Transceiver with Audio/LAN provides a simple and efficient way to extend
not only USB 2.0 signals, but also stereo audio, and LAN connectivity.
These signals are extended as a high quality, uncompressed, data stream
over a single Cat.6A cable with a maximum length of up to 100 metres (328
feet).
A typical system can support one USB host and up to 6 USB devices (3
on the transmitter side and 3 on the receiver side). The location of the
USB host device is automatically set by hot plug detection, but can also
be manually controlled using a front panel button. This unit supports bi-
directional PoC (Power over Cable) and can receive, or provide, power
from/to the connected unit.
2. APPLICATIONS
Security and monitoring
Industrial Control
Conference room and boardroom KVM Extension
3. PACKAGE CONTENTS
2× USB 2.0 Hub Transceiver with Audio/LAN
1× 24V/2.7A DC Power Adapter
1× Operation Manual
4. SYSTEM REQUIREMENTS
The use of industry standard Cat.6A or Cat.7 cable is highly
recommended.