11
1. INTRODUCTION
The PU-HBTPL-ZE HDBaseT Lite Zone extender is designed to allow
AV integrators to easily create additional zones for any HDBaseT
distribution system whilst enabling the HDBaseT pass-through signal
to be extended further over CAT5e/6/7 (up to 60m). This device
supports the transmission of video (resolutions up to 1080p Full HD,
plus 4K Ultra High Definition, and 1920x1200@60Hz), multi-channel
digital audio and control via IR, RS-232 or Web GUI/Telnet IP over a
single CAT5e/6/7 cable. The Zone extender allows signals to be
transmitted up to 60m from the transmitter device to the Zone
extender where the signal can be routed to a local display via the
HDMI output. The signal is also transmitted simultaneously via the
HDBaseT output enabling it to be distributed up to 60m over
CAT5e/6/7 from the zone. The PU-HBTPL-ZE Zone extender utilises
PoC (Power over Cable) to provide power to the connected
Receiver unit, thus no requirement for a PSU on the Receiver end.
This device can be cascaded up to five times to create additional
zones.
2. APPLICATIONS
• Household entertainment sharing and control
• Lecture room display and control
• Showroom display and control
• Meeting room presentation and control
• Classroom display and control
3. PACKAGE CONTENTS
• CAT5e/6/7 over HDMI & CAT5e/6/7 with IR Splitter
•
IR Blaster x 1
•
IR Extender x 1
• 24V DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
• Source equipment with HDMI over CAT5e/6/7 Transmitter
• Display TV/Monitor with HDMI input connector
• HDMI over CAT5e/6/7 Receivers with industry CAT5e/6/7 cables
