3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
Rear
Front
RS-232 In
LAN
HDMI In
HDMI to CAT5e/6 with LAN/IR/RS232
Transmitter
CAT5e/6 Out
Link
IR2 Extender
IR1 Blaster
DC 24V
Power
2
3
1
6
4
7
8
9
5
1
HDMI In:
Connect to HDMI source equipment such as a DVD or Blu-
ray player.
2
LAN:
Connect to an internet or network connection.
3
RS-232 In:
Connect to a PC or laptop with D-Sub 9 pin male cable
for the transmission of RS-232 commands.
4
Power LED:
This blue LED will illuminate when the device is
connected to a power supply.
5
DC 24V:
Plug the 24 V DC power supply into the unit and connect
the adaptor to an AC outlet. Only one side of power needs to be
connected to activate both transmitter and receiver.
6
IR 1 Blaster:
Connect to the supplied IR blaster cable for IR signal
transmission. Place the IR blaster in direct line-of-sight of the
equipment to be controlled.
7
IR 2 Extender:
Connect to the supplied IR receiver cables for IR
signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR extender.
8
Link LED:
The yellow LED will illuminate when both the input and
output signals are connected.
9
CAT5e/6 Out:
Connect to the reciever unit with a Single CAT5e/6
cable for tranmission of all data signals.