CYP PU-232, Руководство по эксплуатации, Страница: 5 / 8

Page 3
4.2 Rear Panel
1. Connect to PC/laptop‘s main control system with DB 9 female to male cable for
sending protocol to source device.
2. Connect from Transmitter side the CAT 5 cable.
3. Connect the 5V DC power adaptor.
Note:
1. Only one adaptor is needed for both Transmitter and Receiver however, if no
image display then two adaptor will be required.
RS-232 OUT
CAT5
DC 5V
1 2 3