CYP PU-1H7HBTPL, Инструкции по эксплуатации

Страница: 6 / 13

33
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER SYNC
HDMI
LINK LINK 1 LINK 2 LINK 3 LINK 4 LINK 5 LINK 6 LINK 7
CAT5e/ 6 / 7 OUT
1 2 3 4
1
POWER LED: Once the power supply is connected the LED will
illuminate.
2
SYNC: This LED will illuminate when the HDMI input port connected
to an active source.
3
HDMI LINK: This LED will illuminate when HDMI output is connected
to TV or display monitor.
4
LINK 1~7: The link LED will illuminate when both the input source
and output display signals are connected through CAT cable.
6.2 Rear Panel
1 HDMI OUT HDMI IN 2 3 4 5 6 7
SERVICE
CAT5e/ 6 / 7 OUT
STD TV
DC 24V IR IN IR OUT
EDID
1 2 3 6 7 8 4 5
1
HDMI IN: Connect with source equipment such as DVD/Blu-ray or
PS3 player.
2
HDMI OUT: Connect to HDMI display for instant image display or
cascade with another family type Transmitter.
3
CAT5e/6/7 OUT 1~7: Connect these ports to CAT5e/6/7 to HDMI
Receivers with CAT5e/6/7 cable to extend the signal up to 60m.
4
IR IN: Connect with IR Extender to receive IR signal from Transmitter
side and blast out at Receiver side. Ensure that remote controller
being used is within the direct line-of-sight of the IR Extender.
5
IR OUT: Connect with IR Blaster to blast out the IR signal received
from the Receiver side. Place the IR Blaster in direct line-of-sight of
the equipment to be controlled.
POWER SYNC
HDMI
LINK LINK 1 LINK 2 LINK 3 LINK 4 LINK 5 LINK 6 LINK 7
CAT5e/ 6 / 7 OUT
1 2 3 4