1. Introduction
This is the most advanced solution for CAT6 to CAT6 signal repeater. These
two CAT6 connectors are for Video and DDC ports of transmitter and
receiver which isolates the DDC capacitances of the two sides of the
buffer. This is compatible to HDMI v1.3 specifications, a cutting edge
technology which defines the support to transfer Deep Color (12
bits/color) video and new lossless compressed (Dolby TrueHD, Dolby Digital
Plus and DTS-HD Master Audio) digital audio.
2. Main Features
●
Compliant with HDMI 1.3, HDCP 1.1 and DVI1.1 standards.
●
Serial data rate at up to 2.25Gbps, capable of supporting the following
digital video formats in Deep Color Mode at up to 36 bits (12bits/color):
●
DTV resolutions: 480i, 576i, 480p, 576p, 720p, 1080i to 1080p.
●
Supports CAT-6 cables for data/DDC transmission.
●
Supports equalize and recover incoming TMDS data before re-transmitting
them with optimal quality regardless of the incoming signal quality.
●
Supports high definition resolution, the input up to 1080p/12bits and output
resolution follows input. The distance table please refers to section 5.
●
Full HDCP Compliant.
●
Easy to install and simple to operate.
3. Package Contents
●
CAT6 to CAT6 Repeater.
●
Operation Manual.
4. Operation Controls and Functions
4.1.
Front Panel
1 DDC input: Connect the DDC input to the DDC output of the transmitter
using CAT-6 cable.
2 Video input: Connect the video input to the video output of the
transmitter unit using CAT-6 cable.
1
1
2
VIDEO
DDC
CAT6 INPUT
