CYP IP-7000RX, Руководство по эксплуатации, Страница: 15 / 44

15
4. Transmitter Specific
COMMAND DESCRIPTION AND PARAMETERS
SET_HDCP_ALLOW N1 Enable/disable HDCP encrypted source
support.
Available values for N1:
0 [Disabled]
1 [Enabled]
GET_HDCP Show the current HDCP support state.
SET_USB_MOUSE N1 Set the USB mouse performance mode.
Available values for N1:
0
[High resolution mode]
1 [Compatibility mode]
GET_USB_MOUSE
Show the current USB mouse performance
mode.
SET_BANDWIDTH N1
Set the broadcast stream bandwidth
maximum.
Available values for N1:
0
[50 Mbps]
1 [100 Mbps]
2 [200 Mbps]
3 [400 Mbps]
4 [Best Effort]
SET_FRAME_RATE N1
Set the percentage of frames from the
source video to encode.
N1 = 2 ~ 100 [Frame Percent]
SET_VW_OSD N1 {N2} Enable/disable video wall OSD to display
the Target Receiver number on the
designated display.
Available values for N1:
0 [Disable]
1 [Enable]
N2 = 0~255 [Target Rx {Optional}]
Note: Target Receiver number can be obtained
by turning on the Video Wall OSD. Omitting
N2 makes the setting global to all Receivers.