CYP IP-6000RX, Руководство по эксплуатации, Страница: 12 / 28

8 8
6.2.2 Rear panel
ETHERNET VGA OUT
MIC
IN
LINE
OUT
AUDIO
EDID
SELECT
DC 5V
HDMI OUT
1 2 3 4 5 6 7
1
Ethernet: Connects with Hub or router for sending data to
Transmitter.
2
HDMI Out: Connects with HDMI display for source output
3
EDID SELECT: Selects source type for obtain correct EDID data;
please arrange the switch to correct source type. The source types
either HDMI or VGA. Please note that the source type of Transmitter
and Receiver shall remain the same or the receiving cannot be
transmitted to Transmitter properly. Please reboot Transmitter and
Receiver after selecting.
4
VGA Out: Connects with VGA display for source output
5
AUDIO MIC IN: Connect from audio source equipment with 3.5mm
phone jack cable for audio signal sending to Transmitter side.
This Audio MIC IN will disable which is not able to transmit the
microphone audio source to Transmitter when implement multi-
case application.
6
AUDIO LINE OUT: Connect to active speaker and Line in MIC input
sound from Transmitter end.
7
DC 5V: Connects with adopter supplied in the package power to
power on the device.