CYP HDBaseT 5Play PUV-1510RX, Руководство по эксплуатации

Страница: 9 / 16

9
6.2 Rear Panel
POWER
LINK
RS-232 OUT
LAN
STD UPDATE
6 7 8 9 5
1
STD/UPDATE Switch:
This switch is reserved for factory use only.
2
RS-232 OUT:
Connect to the device that is to be controlled (via D-Sub
9-pin female cable) by RS-232 commands.
3
LAN:
Connect to a PC or Laptop to utilise the Internet or network
function.
4
POWER LED:
This LED will illuminate when the device is connected to
a power supply.
5
LINK LED:
This LED will illuminate when both the input source and
output display signals are connected through CAT cable. When it
blinks regularly it states the display is NOT sending signals to Receiver
but the Transmitter and Receiver are linked and if it blinks irregularly it
indicates an error has occurred.