14
COMMAND
DESCRIPTION
S HDBTUART 0/1
0=ENABLE
1=DISABLE
R HDBTUART
Reports the numeric equivalent for HDBTUART
setting (as above)
S AUTOSCAN 0/1
0=ENABLE
1=DISABLE
R AUTOSCAN
Reports the numeric equivalent for AUTOSCAN
setting (as above)
S BYPASS 1-6
1=HDMI / 2=HDMI2 / 3=HDMI3 /4=HDMI4 /
5=HDBT1 / 6=HDBT2
R BYPASS
Reports the numeric equivalent for BYPASS setting
(as above)
S RESET 1
Setups the numerical equivalent for RESET
setting (as left)
S POWER 0/1
0=OFF
1=ON
R POWER
Reports the numeric equivalent for POWER setting
(as above)
PORT 0~8
0=HDMI
4=HDMI 4
7=VIDEO
1=HDMI 2
5=HDBT 1
3=HDMI
36=HDBT2
8=PC Last Memory
VOL +
VOL -
Volume Value
Volume Value
GETIP
Shows IP Address / MAC Address
ST
FW Version & Source
Note:
1. Audio Delay is only supported on Analog Stereo output.
2. When the HDMI input is encoded with HDCP, no image will be output
from the PC/HD output.
3. Only LPCM 2 channel digital audio is supported, please ensure that
the source audio is set to LPCM 2 channel audio in order to avoid
unnecessary audio noise.
4. RS-232 commands will be not executed unless followed with a carriage
return and LF. Commands are case-insensitive.
