CYP EL-41WX, Руководство по эксплуатации

Страница: 8 / 16

5
Note
A. This system was tested with 24AWG cables if using cables of another
type, the performance of this system may vary.
B. Cable distance tested with a PS3 & 40” Samsung LED LCD TV.
C. Figures provided in this manual are for reference only, actual figures
may depend on the source and display used along with the cables
specifications.
7.3 Top Panel
① ② ③ ④
q
DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor
to an AC outlet. The LED will switch on when the power cable is plugged in.
w
USB 5V: This slot is where you can connect the mini USB cable from your PC
to supply power.
Note: Power supply only support either DC5V or mini USB power.
e
RS-232: This slot is to connect with a PC or control system with D-Sub 9pin
cable for RS-232 control. For detailed RS-232 commands please refer to
section 9.
r
COAX OUT: This slot is where you connect an amplifier for sending an audio
signal with coaxial cables. When audio return function is on the audio
signal will be received from the output end and when the audio return
function is OFF the audio signal will be received from the input source. This
device supports PCM 2CH and AC3.
Note:
A. The display TV or monitor must support an audio return function and the
function be must turned on in order to perform properly.
B. The display TV or monitor's HDMI input jack must connected to the one
with an audio return function.