CYP EL-41PIP, Инструкции по эксплуатации

Страница: 24 / 36

24
6.7 Telnet Control
Before attempting to use the telnet control, please ensure that both the
Scaler (via the ‘CONTROL’ port) and the PC/Laptop are connected to the
active networks.
To access the telnet control in Windows 7, click on the ‘Start’ menu and
type “cmd” in the Search field then press enter
Under Windows XP go to the ‘Start’ menu and click on “Run”, type “cmd”
with then press enter.
Under Mac OS X, go to Go
→
Applications
→
Utilities
→
Terminal
See below for reference.
Once in the command line interface (CLI) type “telnet”, then the IP address
of the unit and hit enter.
Note: The IP address of the Scaler can be found under Ethernet Setup on the
device’s OSD menu.