CYP Dante AU-DTI4-TX, Руководство по эксплуатации, Страница: 12 / 20

7
COMMAND
Description and Parameters
get audio in N1 pre-gain

Show the current pre-gain volume level for the specified audio input.
Available values for
N1
:
1 [Analogue input 1]
2 [Analogue input 2]
3 [Analogue input 3]
4 [Analogue input 4]
set audio in N1 power mode N2

Set the phantom power voltage level for use by microphones
connected to the specified audio input.
Available values for
N1
:
1 [Analogue input 1]
2 [Analogue input 2]
3 [Analogue input 3]
4 [Analogue input 4]
Available values for
N2
:
0 [No phantom power]
1 [5V]
2 [48V]
get audio in N1 power mode

Show the current phantom power voltage level on the specified
audio input.
Available values for
N1
:
1 [Analogue input 1]
2 [Analogue input 2]
3 [Analogue input 3]
4 [Analogue input 4]
Note: Commands will not be executed unless followed by a carriage return.
Commands are not case-sensitive.