CYP CUSB-V605H, Руководство по эксплуатации, Страница: 12 / 24

7
5) Picture Mode: This section provides a way to select the current video
mode to use when capturing. Available modes are: Full, PoP, and PiP.
Full: The currently selected primary HDMI source will be displayed full
screen.
PoP: Both HDMI sources will be displayed side by side with their
proper aspect ratios maintained and black bars above and below the
video.
PiP: Both HDMI sources will be displayed with the primary source full
screen in the background and the other source displayed in a smaller
PiP window that can be customized.
Configuration Examples:
2
1
2
1
6) Main Video Source: Use these buttons to select which HDMI input is
currently set as the primary video source.
7) PiP Settings: This section provides control over the size, position and
transparency of the PiP window when PiP mode is active.
Steps for size/position: Set the step size, in pixels, that is used when
adjusting the size/position of the PiP window using the adjustment
arrows. Setting a high number allows for faster adjustments, but small
numbers are required when fine tuning.
Size: Click on the arrow buttons to adjust the horizontal and vertical
size of the PiP window.
Position: Click on the arrow buttons to adjust the horizontal and
vertical position of the PiP window.
Transparency: Use the slider to set the preferred transparency level
for the PiP window.
8) Mirror: This section provides control over the horizontal and vertical
mirror options for both windows in the multi-windowing modes.
Main: Click on the appropriate button to select the preferred flip or
mirroring effect to apply, if any, to the primary source window.
Sub: Click on the appropriate button to select the preferred flip or
mirroring effect to apply, if any, to the secondary source window.
9) FW Version/App Version: Displays the unit’s current firmware version
and the USB Video Capture Control software’s current version.