CYP CSR-8PSU-12V, Руководство по эксплуатации

Страница: 14 / 20

9
6.4 RS-232 Control
Unit Controlling PC Serial Port Settings
Pin Definition Pin Definition Baud Rate 19200
1 1 Data Bits 8
2 TxD 2 RxD Parity Bit None
3 RxD 3 TxD Stop Bits 1
4 4 Flow Control None
5 GND 5 GND
6 6
7 7
8 8
9 9
6.5 Telnet Control
Before attempting to use Telnet control, please ensure that both the
unit and the PC are connected to the same active networks.
To Access the Command Line Interface (CLI)
Windows 7 Click Start , type “cmd” in the search field, and
press Enter .
Windows XP Click Start > Run , type “cmd”, and press Enter .
Mac OS X Click Go > Application s > Utilities > Terminal .
Once in the Command Line Interface (CLI) type “ telnet ” followed by
the IP address of the unit (and the port number if it is non-standard)
and then hit “Enter”. See below for reference.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Adminstrator\telnet 192.168.1.50 23
Note: The unit’s default IP address is 192.168.1.50. If the IP address
is changed then the IP address required for Telnet access will also
change accordingly.