CYP CSC-V101PTX, Руководство по эксплуатации, Страница: 8 / 24

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER IN HDMI MENU ENTER - +
VGA SERVICE PUV-1620S-TX
1 2 3 4 5 6 7
1 SERVICE:
This is reserved for firmware update use only.
2 POWER LED:
This LED will illuminate to indicate the unit is on and
receiving power.
3 IN Button & LEDs:
Press this button to switch between the HDMI
and VGA inputs. The LED will illuminate to indicate which source is
currently selected.
4
MENU: Press to enter the OSD menu, or to back out from menu items.
Note: Pressing “MENU” and “+” together will reset the output resolution
to XGA (1024×768@60Hz). Pressing “Menu” and “−” together will reset the
output resolution to 1080p@60Hz.
5 −:
Press to move down or adjust selections within OSD menus.
6 +:
Press to move up or adjust selections within OSD menus.
Note: Pressing and holding the “+” and “−” keys at the same time for more
than 3 seconds will perform a factory reset of the unit.
7 ENTER:
Press to confirm a selection within the OSD or to go deeper
into a menu item.