CYP CSC-5500CVE, Руководство по эксплуатации

Страница: 8 / 40

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER CV COMP PC 1 PC 2 PC 3 HDMI 1 HDMI 2 HDMI 3 MENU
XGA
ENTER
-
+
720P
-
+
EL-7500V
2 3 4 5 6 1
1
POWER Button & LED: Press this button to power the unit on or place
it into stand-by mode. The LED will be lit when the unit is receiving
power.
Note: The power switch on the back of the unit must also be in the “On”
position for the unit to receive power.
2 IR Window:
Accepts IR signals from the included IR remote for control
of this unit only.
3 CV/COMP/PC 1~3/HDMI 1~3 Buttons & LEDs:
Press any of these
buttons to switch immediately to the corresponding input. An LED
will illuminate to indicate which source is currently selected.
4 MENU Button:
Press to enter the OSD menu, or to back out from
menu items.
5
− & + Buttons: Press to navigate or to adjust selections within the
OSD menu.
6
ENTER Button: Press to confirm a selection within the OSD or to go
deeper into a menu item.
Note: Pressing “ENTER” and “+” together will reset the output resolution to
XGA (1024×768@60Hz). Pressing “ENTER” and “−” together will reset the
output resolution to 720p@60Hz.