CYP CPRO-2E4KS, Руководство по эксплуатации

Страница: 8 / 12

3
5. Other Timings not listed above will be bypass always.
6. HDMI output display change require power replug in order for
the device to get the new EDID.
7. Displaying HDMI 4Kx2K contents, equivalent source signal and
HDMI cable are required in order to secure the quality.
4
SERVICE: This slot is reserved for factory use only.
5
DC 5V IN: Connect 5V DC power supply into the unit and connect
the adaptor to an AC outlet. Both 4K2K & 1080P’s LEDs will
illuminate when power is connected.
6.2 Rear Panel
OUTPUT
SCALED BYPASS
2 1
1
SCALED: This slot is to connect with HDMI TV/display with or without
4K2K specification for output AV displaying according to Bypass
switch setting.
2
BYPASS: This slot is to connect with HDMI TV/display with or without
4K2K specification for output AV displaying according to input
source signal setting.