CYP CPLUS-VSE2DD, Руководство по эксплуатации

Страница: 9 / 16

4
2
HDMI OUTPUT: Connect to an HDMI Ultra HD display (TV/monitor) or
UHD AV receiver for video and audio output.
3
L/R OUTPUT: Connect to the analog line-level input of an amplifier
or active speakers for audio output.
4
COAX OUTPUT: Connect to the digital optical input of an AV
receiver for audio output.
5
OPTICAL OUTPUT: Connect to the digital coaxial input of an AV
receiver for audio output.
6
HDMI AUDIO BYPASS/2CH: Use this switch to select the audio
format of the HDMI output. Switch to 'BYPASS' to allow the audio to
pass-through from the HDMI input port; switch to '2CH' to enable
audio decoding and LPCM 2CH down-mixing of Dolby Digital or
DTS audio signals from the HDMI audio source.
7
SPDIF BYPASS/2CH: Use this switch to select the audio format of the
Coaxial and Optical outputs. Switch to 'BYPASS' to allow the audio
to pass-through from the HDMI input port; switch to '2CH' to enable
audio decoding and LPCM 2CH down-mixing of Dolby Digital or
DTS audio signals from the HDMI audio source.
8
EDID STD/TV: Use this switch to select the EDID mode, 'STD (Standard)
mode' or 'TV mode'. When in 'TV mode', the unit will automatically
detect and store the EDID settings of the display connected to
the HDMI output. If there is no picture or a distorted image, please
switch to 'STD mode' which will use video up to 1080p at 60Hz and
audio up to LPCM 2CH at 48kHz, Dolby Digital 5.1CH and DTS 5.1CH.
9
SERVICE: Manufacturer use only.
10
DC 5V: Connect the adaptor included in the package to an AC
wall outlet for power supply.