CYP CPLUS-V2PEL, Руководство по эксплуатации

Страница: 29 / 38

24
COMMAND
Description and Parameters
N2 = A ~ B [Target output port]
N3 = ON, OFF [Enable/Disable event type]
GET AUTOMATION EVENT N1 CEC N2

Show the current state of CEC automation event type N1 .
Available values for N1 :
1 [Power on]
2 [Out A sync active]
3 [Out A sync lost]
4 [Out B sync active]
5 [Out B sync lost]
N2 = A ~ B [Target output port]
SET AUTOMATION EVENT N1 CEC N2 COMMAND N3

Set the CEC command to send when automation event N1 is
triggered.
Available values for
N1 :
1 [Power on]
2 [Out A sync active]
3 [Out A sync lost]
4 [Out B sync active]
5 [Out B sync lost]
N2 = A ~ B [Target output port]
Available values for N3 :
0 [TV power off]
1 [TV power on]