CYP CPLUS-V11PE8, Руководство по эксплуатации

Страница: 10 / 20

5
6.3 RS-232 Commands
Command Name Description Parameters
P0 SET UNIT POWER OFF NONE
P1 SET UNIT POWER ON NONE
P? GET POWER STATUS NONE
SOURCEDET SHOW INPUT
INFORMATION
NONE
SINKINFO SHOW SINK
INFORMATION
NONE
HDCPIN SET/SHOW INPUT
HDCP STATUS
HDCPIN N [N=1~3, ?]
1: FOLLOW IN
2: FOLLOW OUT
3: APPLE MODE
?: GET STATUS
Default: FOLLOW OUT
ECHO SET/SHOW CONSOLE
AUTO ECHO MODE
ECHO N [N=0, 1, ?]
0: OFF
1: ON
?: GET STATUS
Default: ON
FADEFAULT SET UNIT TO FACTORY
DEFAULT
NONE
VER SHOW UNIT
FIRMWARE VERSION
NONE
REBOOT SYSTEM REBOOT NONE
? SHOW DESCRIPT OF
COMMAND
NONE
HELP SHOW DESCRIPT OF
COMMAND
NONE
Note: Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.