CYP CPLUS-SDI2H-W CPLUS-SDI2H, Руководство по эксплуатации

Страница: 8 / 20

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
L/R
OUT SCALE SCALE SERVICE
SDI IN
3G 6G 12G HD
PWR SERVICE
A B
HDMI
OUT
1 3 4 5 6 7 8
2
1
SERVICE Port: This port is reserved for firmware update use only.
2
SDI IN LEDs: These LEDs will illuminate to indicate the SDI format
currently in use on the SDI input.
3
PWR LED: This LED will illuminate to indicate the unit is on and receiving
power.
4
SCALE LED: This LED illuminate when the HDMI outputs are being
downscaled.
5
HDMI OUT A~B LEDs: These LEDs will illuminate to indicate when a
valid sink has been detected on the associated output port. When no sink
is detected the LED will remain off.
6
SERVICE Button: Press this button to put the unit into its firmware
update mode.
Firmware Update Process: To update firmware after pressing the
button, connect the unit to a PC/laptop via the Micro-USB Service
port and the unit will appear as an external drive. Drag an appropriate
firmware file onto this drive and the unit will automatically begin the
update process. After the update completes, the unit will automatically
reboot.
7
SCALE Button: Press this button to enable or disable the HDMI outputs’
4K to 1080p downscaling function.
Note: 3840x2160 will be downscaled to 1920x1080. 4096x2160 will be
downscaled to 2048x1080.
8
L/R OUT Port: Connect to powered speakers or an amplifier for analog
stereo audio output.