
12
3) USB Control Mode:
Enable or disable the USB 2.0 (Mini B) port for
connection to USB host devices such as a PC or laptop. Selecting
Device mode enables the USB 2.0 (Mini B) port. Selecting Host
mode disables the USB 2.0 (Mini B) port.
Note: The default setting in Transmitter Mode is Device. The default
setting in Receiver Mode is Host. In a Point-to-Point extension
configuration, only one transceiver should be set as a USB Device
at a time.
4) USB Virtual Hub:
Enables or disables the simultaneous connection
USB mode which allows the PC/Laptop connected to this unit
to be paired with the USB devices on up to 7 “Host Mode”
transceivers.
Note: Only available when the USB Control Mode is set to Device.
5) Input:
Select current input source. Input 1 is the local HDMI input,
Input 2 is the DisplayPort input, and Input 3 is the optical fiber
streaming video input.
6) Local Priority:
Enable the priority auto switch mode and select the
input to prioritize or disable the mode completely. When enabled,
the unit will automatically switch to the designated input if a live
signal is present on it.
INFORMATION
2ND LEVEL
3RD LEVEL
Resolution
[Show the current
status of each item]
Status
FW Version
IP
LAN MAC
USB MAC
SN
Fan Status
1) Information:
Shows details of the unit’s current status including
detected input resolution, transceiver mode, firmware version, IP
address, MAC address, serial number and fan state.
Содержание COH-TR7
