CYP COH-RX5, Руководство по эксплуатации

Страница: 12 / 24

12
6.4 Receiver's Rear Panel
DC 12V
LAN USB
AUDIO IR OUT IR IN RS232
HDMI OUT SFP+
1 2 7
3 4 5 6
8 9
1 HDMI OUT:
Connect to HDMI TVs, monitors or amplifiers for digital
video and audio output.
2 SFP+:
Connect a standard SFP+ module to allow data transmission
over optical fiber to a compatible Receiver.
Note: The SFP+ module must support a dual-optical fiber connection
style, such as LC, or be pre-terminated dual-optical fiber cables. Single-
mode and multi-mode support is dependent on the SFP+ modules used.
3
AUDIO OUT: Connect to powered speakers or an amplifier for stereo
analogue audio output.
4 IR OUT:
Connect to the provided IR Blaster to transmit IR signals to
devices within direct line-of-sight of the IR Blaster.
5 IR IN:
Connect to the provided IR Extender to extend the IR control
range of remotely located devices. Ensure that the remote being used
is within direct line-of-sight of the IR Extender.
6 RS232:
Connect to a PC, laptop or a serial controllable device for the
extension of RS-232 signals.
7 LAN:
Connect to an Ethernet supporting device or to your local
network as appropriate to extend the network between the
Transmitter and Receiver.
8
USB: Connect directly to a standard USB peripheral such as a mouse,
keyboard or flash drive to extend its USB functionality to the port on
the connected Transmitter.
9 DC 12V:
Plug the 12V DC power adapter into this port and connect it
to an AC wall outlet for power.